Typical applications include wood scrap such as blocks, cutoffs, edgings, slabs and trim ends up to 5” thick. Other applications include veneer roundup, plywood, and particleboard.
The PM series uses PM-GM rings with a 22” cutting circle and a steel flywheel for stored rotational energy to power through momentary surge loads.
The horizontal feed is designed for the processing of long pieces using a vibrating conveyor.
Pieces larger than the hog can process in 5 to 10 seconds can be metered with an available Current Sensing Unit.
The discharge material can typically be conveyed up to 100 feet into a cyclone, truck, or open field using the #40, #50 or #60 Integral Fan.
Typical applications include wood scrap such as blocks, cutoffs, edgings, slabs and trim ends up to 5” thick.
Other applications include veneer roundup, plywood, and particleboard.
The PM series uses PM-GM rings with a 22” cutting circle and a steel flywheel for stored rotational energy to power through momentary surge loads.
The horizontal feed is designed for the processing of long pieces using a vibrating conveyor.
Pieces larger than the hog can process in 5 to 10 seconds can be metered with an available Current Sensing Unit.
Rear discharge with a rectangular to round transition (included) allows pneumatic pickup of discharge material into an existing blowpipe system.
Typical applications include wood scrap such as blocks, cutoffs, edgings, slabs and trim ends up to 5” thick.
Other applications include veneer roundup, plywood, and particleboard.
The PM series uses PM-GM rings with a 22” cutting circle and a steel flywheel for stored rotational energy to power through momentary surge loads.
The horizontal feed is designed for the processing of long pieces using a vibrating conveyor.
Pieces larger than the hog can process in 5 to 10 seconds can be metered with an available Current Sensing Unit.
Gravity discharge of material out of an opening in the base plate of the hog.
Typical applications include bark and wood scrap such as blocks, cutoffs, edgings, slabs and trim ends up to 5” thick.
Other applications include veneer roundup, polyurethane scrap, plywood, paper, gypsum, particleboard, broken and whole pallets.
The PM series uses PM-GM rings with a 22” cutting circle and a steel flywheel for stored rotational energy to power through momentary surge loads.
The rings and fanwheel can be hardsurfaced to extend their economic life in abrasive applications.
The discharge material can typically be conveyed up to 100 feet into a cyclone, truck, or open field using the #40, #50 or #60 Integral Fan.
Typical applications include bark and wood scrap such as blocks, cutoffs, edgings, slabs and trim ends up to 5” thick.
Other applications include veneer roundup, polyurethane scrap, plywood, paper, gypsum, particleboard, broken and whole pallets.
The PM series uses PM-GM rings with a 22” cutting circle and a steel flywheel for stored rotational energy to power through momentary surge loads.
The rings can be hardsurfaced to extend their economic life in abrasive applications.
Gravity discharge of material out of an opening in the base plate of the hog.